the National Center for Injury Prevention and Control has published an article to help parents to use the correct car seat to avoid injuries. Some models having narrow booster seats include Chicco Keyfit 30, UppaBaby Mesa, Peg Perego Primo Viaggio, and Cybex Aton. Infant seats are rear facing only seats and have a weight range of about 4 – 45 pounds at max. The material of harness belt is really soft and strong. As a harness booster (25-65 pounds, up to 54" tall), you can install using the included non-rigid LATCH straps (LATCH can be used up to 40 pounds) or the vehicle's seat belt. For convenience it has a no-rethread harness, adjustable recline, two cup holders, and arm rests. LATCH system makes it easy to adjust the convertible car seat from rear facing to forward facing position. The pad comes off and therefore this is extremely easy to clean. The best part is that it has a LATCH system and kids can use the 5 point harness positions. First, parents commonly ask us whether the SlimFit is a good option for fitting three car seats in a row. There are a few goals when you're trying to fit three car seats in a row. It has a great weight range, starting at only 4 pounds with the included infant insert, and going up to 35 pounds (or up to 32" tall) rear-facing. The material that is used for harness is super soft, yet it doesn’t create tangles. Once you transition to forward-facing mode, your child will be too heavy for the LATCH. The Aton 2 usually sells for about $250-300, including the base. Clek figured out how to get all of those convenience and safety features into a car seat that weighs only 9 pounds! Over the time the fabric will wear out and fade, parts wear out or break, select a seat that can have these being replaced. If you drive a minivan (like the Sienna, Odyssey, or Caravan), full-size car (like the Avalon, Taurus, Impala), midsize SUV (like the Grand Cherokee, Pilot, Highlander, Traverse, Flex, or Explorer), or full-sized SUV (like the Tahoe, Sequoia, Expedition, Land Cruiser or Armada), three seats should fit just fine into the backseat without much strategic planning. It supports kids from as low as 40 pounds and up to 110 pounds (or 38-57" tall). For basics, the Pipa supports infants and toddlers from 4 to 32 pounds, or 32" tall. After this the safety seat should stay tight once installed. We were able to fit three of these across in a RAV4, CR-V, and Jeep Compass, without any challenges. Which is better a Latch system or the safety belt? It also protrudes very far from the back seat, limiting front seat leg room when placed anywhere other than the center position. It can be installed without the base using the European or a modified American belt routing. A lot of parents use capsule car seat for infants and newborns as it is much easier to carry baby in this kind of car seat. In our experience, the most challenging situations are when you would like to fit three of the same car seat styles in a row. The seat is super comfortable and top notch quality fabric is used in car seat covers. It is the best rear facing infant car seat as you can use it in rear facing position from 4 upto 35lbs. Being a parent, it is really hard to find and make a decision to buy the best baby gear for their loved ones. It is highly recommended to buy Graco SlimFit. Second, because it sits a bit higher in the seat, it gives a little more room for messing with buckles, LATCH connectors, and other adjustments that are lower down to the seat. Most vehicles do not have center LATCH positions, so if you're inclined to use LATCH installation, the Liing might be limited to the outboard (left or right) seats. If you are on a budget, then this is an average choice for you. The Clek Foonf and Fllo are even more popular than the Liing, offering some of the best overall convertible car seats on the market. You migh wonder why you'd need to remove the arm rests, but just try to stuff two of these into a suitcase without popping them off! Most vehicles do not have center LATCH positions, so if you're inclined to use LATCH installation, the Liing might be limited to the outboard (left or right) seats. You can check out the, Up near the top spot on our best overall infant car seat list, this is an awesome, highly functional, safe, well-built, and stylish narrow infant car seat. In rear facing narrow infant car seat mode you can use it for 14 lbs to 50 lbs baby. The most trusted brand among the US parents is Britax. When installed using the vehicle's seat belts, the Clek Liing uses lockoffs on the base to help achieve a stable and secure fit; in the manual, they call this a belt tensioner, and it works amazingly well. So this is the main feature that distinguishes this car seat with others available in the market. This narrowest infant car seat is designed in a way that you can easily use it for newborns. Car seats come in three sizes: Booster Seats, narrow convertible car seats and Infant Seats. As the need for 3 full narrow car seats for toddlers in the back continues to increase in the market, almost every car manufacturer integrates this facility for the consumer. There are a couple things we love about the seat, including the side-impact protection and EPS energy-absorbing foam, the great carry handle, and the fact that it's a sub-$100 car seat that doesn't require harness rethreading! Model under consideration is Safety 1st Grow and Go 3 in one. 4. Again, there is no lock-off for the seat belt in forward-facing mode. The Snugride itself comes in at 17" wide, and its base is a slim 13.5" wide, making it a great candidate for squeezing three car seats in a row. This isn't normally an issue, but it can make adjustments, buckles, and isofix connectors harder to access when the seat is so low down. One of the questions we receive a lot from parents is whether choosing a narrow car seat compromises toddler or infant safety. This seat can also be installed without the base with the seat belt. Even more importantly, they come in at only 16.9" wide, which is a really remarkably slim profile for a fully-featured convertible car seat! 3. As we were testing the seat in a three-across configuration, we were puzzled by how some sites recommend the SlimFit as a narrow convertible car seat. Booster seats basically lift your child up so that he can use the seat belt without having the need to use the harness. For the child is growing in size, opt for the convertible safety seats that car be adjusted to accommodate the increase in size. Wide straps are used to get rid of the issue of twisting and such a soft and flexible material is used to ensure smooth buckling. The taller and heavier your child, the safer and more appropriate the booster will be. Furthermore, there are 6 recline positions that makes it one of the best harness to booster seats, so it adds on an extra level of comfort for babies. TinyFit can be used from 4 pounds to 22 pounds. It protects the neck and head of your baby in first place. Made in Italy, the Peg Perego is not only stylish but also a bit on the expensive side, coming in at about $300. Being cognizant of the fact that there is some guesswork involved in each vehicle, we tried to identify the seats that are not only the narrowest but also the most flexible in their installation options. The secret, as we've come to find out, is to figure out the right combination of the shoulder belt, LATCH, and 5-point harnesses that will make life easier for everyone. You can adjust the car seat and install it professionally without reading the installation manual. Without the base, the car seat can be installed using the American or European belt routing. For safety, it has the AirProtect side-impact protection and energy-absorbing foam. Our friends at Babylist, WhatToExpect, and Babygearlab. You can check it out here! The belt guides are extremely effective at keeping the shoulder belt securely in position, and it's basically impossible for them to pop out of the belt guide. This is not much impressive if we talk about its features but it is a considerable choice for the parents who are looking for the best newborn car seats in a budget. ), and it has built-in recline which is nice for fitting seat backs with variable slopes (like swapping between the upright seat backs of a Jeep to a relatively reclined sedan). Some examples of such cars include 2020 GMC Sierra Crew Cab. If your baby is 40 pounds, then you will have to change the position of car seat to forward facing position. This is Graco's narrowest convertible car seat. Aluminium reinforced adjustable head support and the sidewalls makes it an ideal all in one convertible car seat. Let's start with installation options for narrow backseats. Second, because it's the slimmest option from Graco, and might be suitable for some limited situations. Did we mention that the DLX, Elite, and Platinum Snugride models are usually only about $150-200? Overall, not great for fitting three in a row in most situations. The LATCH weight limit is 65 pounds (combined weight of child and seat), so that means your child will not be able to use the LATCH once they hit 40 pounds. This is the reason that the awesome Immi Go and mifold hifold booster seats were developed. Other convenience features abound, including rigid LATCH connectors to hold the seat in place while it's unoccupied, adjustable headrest height across 12 settings, adjustable recline, and easily removable cover that is both machine washable and dryer safe. All Clek car seats offer superior style, quality, safety, and versatility. Installation is always easy with Chicco car seats, and this one makes it a breeze! This is a good choice for parents who are looking for the great rear-facing convertible infant seat. But let's get down to brass tacks: how wide is it, and how secure and easy is the install? But needless to say it was a very tight fit, and parent assistance was needed during each booster buckle-up (even with a 6 and 8-year-old) because the seats were squeezed up so tightly to each other that fitting two hands down into the slots to buckle was basically impossible. Some newer SUVs and minivans come with center LATCH connectors, which can give you more flexibility with install - it's worth taking a few minutes to check. You can get this Best Rear Facing Car Seat in under $300. For safety, the Primo Viaggio has good crash test ratings, side-impact protection, EPS energy-absorbing foam, and the anti-rebound bar integrated into the base. The good quality car seats ranges between $250 to $450, and it will be an investment for life or till the time you require narrow convertible car seat, narrowest booster car seat or a narrowest infant car seat. Impressed? The car seat fabric is easy to clean and washable, so you need not to worry about the mess that kids create while enjoying their snacks in the car. The forward facing position has increased weight and height limits and thus these kinds of seats grow with your child. If you plan on installing the infant car seat to the center position, the Primo Viaggio 4-35 infant car seat is ideal, especially if your vehicle is equipped with center lower anchors. It is the most affordable convertible car seat with a limited features. Thus, while it's definitely narrow and lightweight, and generally is an amazing infant car seat, it's not ideal for tight circumstances where you want to install in an outboard position. It's not very narrow at all, and achieving a stable installation with the vehicle's seat belt is very limited by the lack of lock-offs. Yes, it is wider at the torso than other car seats on this list, but the super narrow 14" base makes sharing backseat space with a rear-facing infant car seat much easier. Under those extreme retraction conditions, sometimes the belt would pop out of the belt guide, which can get frustrating. With the LATCH, it uses non-rigid strap-based LATCH connectors with a unique push-down and pull-up tensioning system similar to the Fit2. When installed using LATCH, the Liing uses rigid LATCH connectors that are limited to seating positions with the proper LATCH spacing (11" apart). Headrest is adjustable and provides proper support to kid’s head and neck. Just like the Aton 2, that's somewhat limited height range, and your child will likely reach that point well before their 2nd birthday. We do not take any free samples from any brand or any sponsorship. In general, the SlimFit can help you fit three in a row in a larger vehicle, like a full-sized car, SUV, minivan, or truck, but it might not help you fit three car seats in a row in a relatively normal-size vehicle. These seats truly save you a lot of money but please note that they are not dedicated to work in one specific mode therefore they may not work as well as standalone seats do. So I would suggest you to go for Chicco NextFit Convertible Car Seat. Uppababy Mesa narrowest car seat is an excellent choice for the parents who are looking to fit 3 across in a row. The reason is that outside of the United States, people tend to drive smaller vehicles such as VWs, Fiats, Renaults, Skodas, Peugeots, and small Toyotas, so the market for narrow car seats is much larger than it is in the US. The only major items missing from this booster are the LATCH system, adjustable recline, and adjustable headrest height. You can check out the Combi Coccoro convertible car seat here! This has been verified by various experts who used narrow booster seats, a convertible and an infant seat. For safety, the Fit2 is equipped with an anti-rebound bar, EPS energy-absorbing foam, and side-impact protection. If you are looking for best rare facing infant car seat, you can count on this one. 5. In rear-facing mode, it can be installed with the included flexible (non-rigid) LATCH connectors, or using the vehicle's seat belts. The other models that are discussed in this article are good to go with medium to big sized cars, but Combi Coccoro infant convertible car seat is the only option that fits into a small car. This is especially helpful when the booster is installed in outboard seating positions. This convertible car seat is under $300, so price is reasonable and affordable. The Aton 2 offers some great versatility for tight backseat configurations, coming in at a slim 17.3" wide. This helps the car seat from getting pushed around and ending up at a funny angle, especially when positioned near a door. One of our favorite aspects of this booster is the belt-positioning system. It has two cup holders, so kids can enjoy their favorite snacks during long trips. First know the scope of your car by reading the car’s user’s manual. Because there are no integrated lock-offs in rear-facing mode, you will be best-served by installing with the LATCH until your child reaches 40 pounds. I’m not going to blindly agree with Britax and say that it will definitely last 10 years, but it looks pretty solid built and I think it should last about 7 to 8 years. This car seat lacks a few features as compared to the Diono Radian RXT, but on the other hand it has a lower price as well.